1) Valid positional data can be read once this time has elapsed.
Electrical data
Connection type
Male connector, MS, 6-pin, radial 1)
Supply voltage
8 ... 30 V
Reference signal, number
1
Reference signal, position
180°, electric, gated with A
Reverse polarity protection
✔
Short-circuit protection of the outputs
✔ 2)
MTTFd: mean time to dangerous failure
330 years (EN ISO 13849-1) 3)
1) The Zero-Set function is not available with 6-pin MS connector or M12 connector options.
2) Short-circuit opposite to another channel or GND permissable for maximum 30 s.
3) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40°C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532.
PIN assignment View of MS male device connector on encoder
maximum revolution range
Diagrams Signal Outputs with Counter Clock-wise Counting Direction Option Selected (B leads A for clock-wise rotation). Complement signals AN, BN and ZN are not shown.
Diagrams Signal Outputs with Clock-wise Counting Direction Option Selected (A leads B for clock-wise rotation). Complement signals AN, BN and ZN are not shown.
Dimensional drawing DFS25 servo flange mount, radial connector outlet M12 and MS, cable outlet
PIN assignment View of MS male device connector on encoder
maximum revolution range
Diagrams Signal Outputs with Counter Clock-wise Counting Direction Option Selected (B leads A for clock-wise rotation). Complement signals AN, BN and ZN are not shown.
Diagrams Signal Outputs with Clock-wise Counting Direction Option Selected (A leads B for clock-wise rotation). Complement signals AN, BN and ZN are not shown.