Mounting systems

Show all Hide all
Filter by:

1,346 results:

Result 1 - 24 out of 1346

  • Description: FlexFix bracket for 2 devices (e.g. sender and receiver), can be aligned ± 15°, including M5 screw
  • Material: Plastic
  • Packing unit: 4 pieces
Details
Compare now
Piece
  • Description: FlexFix bracket for 1 device (e.g. sender or receiver), can be aligned ± 15°, including M5 screw
  • Material: Plastic
  • Packing unit: 2 pieces
Details
Compare now
Piece
  • Material: Plastic
  • Items supplied: Without mounting hardware
  • Usable for: Round sensors with 6.5 mm housing diameter without fixed stop
Details
Compare now
Piece
  • Material: Plastic
  • Items supplied: Without mounting hardware
  • Usable for: Round sensors with 4 mm housing diameter without fixed stop
Details
Compare now
Piece
  • Material: Plastic
  • Items supplied: Without mounting hardware
  • Usable for: Round sensors with 5 mm housing diameter without fixed stop
Details
Compare now
Piece
  • Material: Plastic
  • Items supplied: Without mounting hardware
  • Usable for: Round sensors with 3 mm housing diameter without fixed stop
Details
Compare now
Piece
  • Dimensions (W x H x L): 155 mm x 155 mm x 2,000 mm (column device)
  • Material: Aluminum
  • Suitable for: Column device COD for light grid MLG-2
Details
Compare now
Piece
  • Dimensions (W x H x L): 155 mm x 155 mm x 2,400 mm (column device)
  • Material: Aluminum
  • Suitable for: Column device COD for light grid MLG-2
Details
Compare now
Piece
  • Dimensions (W x H x L): 155 mm x 155 mm x 1,500 mm (column device)
  • Material: Aluminum
  • Suitable for: Column device COD for light grid MLG-2
Details
Compare now
Piece
  • Description: Alignment bracket for scanGrid2, can be aligned ± 10°
  • Suitable for: scanGrid2
Details
Compare now
Piece
  • Description: Weather proof cover
  • Material: Aluminum
Details
Compare now
Piece
  • Description: QuickFix bracket for 1 device (e.g. sender or receiver)
  • Material: Plastic
  • Packing unit: 2 pieces
Details
Compare now
Piece
  • Description: Mounting bracket for LMS5xx (for retrofitting, if 2018303 is already in use)
  • Material: Stainless steel V2A (1.4301)
Details
Compare now
Piece
  • Description: Measuring wheel with O-ring (NBR70) for 6 mm solid shaft, circumference 300 mm
Details
Compare now
Piece
  • Description: Weather protection hood
Details
Compare now
Piece
  • Description: Front screen protection set (protects sensors from damage by flying sparks and welding beads)
  • Packing unit: 2 pieces
  • Items supplied: Incl. sliding nuts and fastening screws
  • Suitable for: M40x-0260xxxxx
Details
Compare now
Piece
  • Description: Collet for through hollow shaft, shaft diameter 1/2 (12.7 mm), outer diameter 14 mm
Details
Compare now
Piece
  • Description: Collet for blind hollow shaft, shaft diameter 1/4 (6.35 mm), outer diameter 15 mm
Details
Compare now
Piece
  • Description: Collet for blind hollow shaft, shaft diameter 8 mm, outer diameter 15 mm
Details
Compare now
Piece
  • Description: Collet for blind hollow shaft, shaft diameter 3/8 (9.525 mm), outer diameter 15 mm
Details
Compare now
Piece
  • Description: Collet for blind hollow shaft, shaft diameter 10 mm, outer diameter 15 mm
Details
Compare now
Piece
  • Description: Collet for blind hollow shaft, shaft diameter 12 mm, outer diameter 15 mm
Details
Compare now
Piece
  • Description: Collet for blind hollow shaft, shaft diameter 1/2 (12.7 mm), outer diameter 15 mm
Details
Compare now
Piece
  • Description: Omega bracket (30 mm), mounting position: face side
  • Material: Aluminum
  • Packing unit: 2 pieces
Details
Compare now
Piece

Result 1 - 24 out of 1346