Detection of two switching positions in solar cell handling

Destacking fragile cells with a Delta Robot once required two sensors and tedious adjustment, as the very thin cells demanded switching points in very close proximity (e.g. 200 μm). The MZ2Q addresses our customer’s needs with two programmable switching points in one cylinder sensor. The positions are repeatable within 0.1 mm.

  • Following product families can be used
    • Can be used in all standard cylinders, linear slides, and grippers using the C-slot and – with the help of adapters – in round rod, tie-rod, and profile cylinders
    • Drop-in mounting from above simplifies handling and assembly
    • Easy adjustment of two switching points via teach-in pushbutton
    • LEDs for indicating the two switching points
    • Detection range up to 50 mm stroke
    • Can be used in all standard cylinders, linear slides, and grippers using the T-slot and – with the help of adapters – in round rod, tie-rod, and profile cylinders, and cylinders with a dovetail groove
    • Drop-in mounting from above simplifies handling and assembly
    • Easy adjustment of two switching points via teach-in pushbutton
    • LEDs for indicating the two switching points
    • Detection range up to 50 mm stroke