Protrusion monitoring at pallets
Before the pallet enters the stretch wrapper, its dimensions are measured. The load is checked for overruns in order to ensure a smooth wrapping process. The framework arrangement of the programmable MLG-2 Pro automation light grid reduces shadows. A simple alternative is the TiM5xx 2D LiDAR sensor. The volume can also be determined using the VML track and trace system.
-
Following product families can be used
Dimensioning with perspective- Certified measurement accuracy of up to 5 mm x 5 mm x 2 mm (L x W x H)
- Detects object sizes up to 2,600 mm x 1,000 mm x 1,000 mm (L x W x H) depending on system variant
- Conveyor speed of more than 2 m/s possible
- Easy to integrate thanks to MSC800 controller
Flexible in use for length, width and height measurements- Beam separation: 2.5 mm, 5 mm, 10 mm, 20 mm, 25 mm, 30 mm, 50 mm
- Maximum range: 12 m
- Functions: Cross beam measurement, 4 x zone measurement, high-speed scan, transparent mode
- Interfaces: PNP, analog, RS485, IO-Link, PROFINET, PROFIBUS, EtherCAT®, EtherNet/IPTM, CANopen
- Sun resistance mode with reliable switching threshold
-
Following products can be used
2D LiDAR sensorsTiM- Integrated application: Output of measurement data
- Measurement principle: HDDM+
- Working range: 0.05 m ... 10 m
- Angular resolution: 1°
- Enclosure rating: IP67
- Digital outputs: 1 (PNP, SYNC/device ready)
- Connection type: 1 x “Ethernet” connection, 4-pin M12 female connector, 1 x connection “Power/Synchronization output” 5-pin, M12 male connector, 1 x Micro USB female connector, type B
2D LiDAR sensorsTiM- Integrated application: Output of measurement data
- Measurement principle: HDDM+
- Working range: 0.05 m ... 10 m
- Angular resolution: 0.33°
- Enclosure rating: IP67
- Digital outputs: 1 (PNP, SYNC/device ready)
- Connection type: 1 x “Ethernet” connection, 4-pin M12 female connector, 1 x connection “Power/Synchronization output” 5-pin, M12 male connector, 1 x Micro USB female connector, type B
2D LiDAR sensorsTiM- Integrated application: Output of measurement data
- Measurement principle: HDDM
- Working range: 0.05 m ... 10 m
- Angular resolution: 0.33°
- Enclosure rating: IP67
- Digital outputs: 1 (PNP, SYNC/device ready)
- Connection type: 1 x “Ethernet” connection, 4-pin M12 female connector, 1 x connection “Power/Synchronization output” 5-pin, M12 male connector, 1 x Micro USB female connector, type B
2D LiDAR sensorsTiM- Integrated application: Output of measurement data
- Measurement principle: HDDM
- Working range: 0.05 m ... 25 m
- Angular resolution: 0.33°
- Enclosure rating: IP67
- Digital outputs: 1 (PNP, SYNC/device ready)
- Connection type: 1 x Micro USB female connector, type B, 1 x “Ethernet” connection, 4-pin M12 female connector, 1 x connection “Power/Synchronization output” 5-pin, M12 male connector
2D LiDAR sensorsTiM- Integrated application: Output of measurement data
- Measurement principle: HDDM+
- Working range: 0.05 m ... 4 m
- Angular resolution: 1°
- Enclosure rating: IP65
- Digital outputs: 1 (PNP, SYNC/device ready)
- Connection type: 1 x cable with 12-pin M12 male connector (0,3 m), 1 x Micro USB female connector, type B
2D LiDAR sensorsTiM- Integrated application: Output of measurement data
- Measurement principle: HDDM
- Working range: 0.05 m ... 25 m
- Angular resolution: 0.33°
- Enclosure rating: IP67
- Digital outputs: 1 (PNP, SYNC/device ready)
- Connection type: 1 x “Power/Synchronization output” connection, 5-wire cable with open end (1 m), 1 x “Ethernet” connection, cable, with RJ45 male connector (1 m), 1 x Micro USB female connector, type B
2D LiDAR sensorsTiM- Integrated application: Field evaluation with flexible fields
- Measurement principle: HDDM+
- Working range: 0.05 m ... 10 m
- Angular resolution: 0.33°
- Number of field sets: 16
- Enclosure rating: IP67
- Digital outputs: 3 (PNP, additional 1 x “Device Ready”)
- Connection type: 1 x “Ethernet” connection, 4-pin M12 female connector, 1 x connection “Power”, 12-pin, M12 male connector, 1 x Micro USB female connector, type B
2D LiDAR sensorsTiM- Integrated application: Output of measurement data
- Measurement principle: HDDM+
- Working range: 0.05 m ... 25 m
- Angular resolution: 0.33°
- Enclosure rating: IP67
- Digital outputs: 1 (PNP, SYNC/device ready)
- Connection type: 1 x connection “Power/Synchronization output” 5-pin, M12 male connector, 1 x Micro USB female connector, type B, 1 x “Ethernet” connection, 4-pin M12 female connector
2D LiDAR sensorsTiM- Integrated application: Field evaluation with flexible fields
- Measurement principle: HDDM+
- Working range: 0.05 m ... 10 m
- Angular resolution: 0.33°
- Number of field sets: 16
- Enclosure rating: IP67
- Digital outputs: 3 (NPN, additional 1 x “Device Ready”)
- Connection type: 1 x connection “Power”, 12-pin, M12 male connector, 1 x “Ethernet” connection, 4-pin M12 female connector, 1 x Micro USB female connector, type B