AHS/AHM36 absolute encoders set standards when it comes to mechanical adaptation, communication and resistance to environmental influences. With their rotatable male connector or cable connection as well as various mounting hole patterns and adapter flanges, these encoders are suitable for nearly any application. The IO-Link, CANopen and SSI interfaces enable easy integration into various control environments. Encoder configuration can be adapted to individual needs using various tools. The rugged, reliable, fully magnetic sensor system provides a maximum resolution of 14 bits (singleturn) or 26 bits (multiturn). Due to the stainless-steel design and enclosure rating IP69K, the Inox versions are suitable for use under very harsh ambient conditions.
At a glance
36 mm absolute encoder with maximum 26 bits (singleturn: 14 bits multiturn: 12 bits)
Face mount flange, servo flange, blind hollow shaft
Rotatable male connector or cable connection
IO-Link, CANopen, SSI interface with programmable parameterization
Stainless steel (Inox versions)
IP67 to IP69K protection class
For encoders, flexibility is key
In order to provide maximum flexibility in the design of the mechanical interface, the AHS/AHM36 encoders are available with three different flange types (face mount flange, servo flange, blind hollow shaft), each with five different shaft diameters. Various assembly hole patterns are available in the face mount flange. A range of different pitch hole diameters are covered by the flexible stator coupling on the blind hollow shaft. And last but not least, a range of adapters guarantees compatibility with almost all absolute encoders with typical 60 mm flange designs. With the rotatable male connector or cable connection, the AHS/AHM36 can be integrated into the application in even the most limited of spaces and reduces the number of encoder variants when different installation situations are required.
Quick replacement for permanent benefit
Due to their compact size, the various flange types, adapter flanges and assembly hole patterns as well as the rotatable male connector or cable connection, the AHS/AHM36 devices can be integrated into virtually any application
Encoders for rough environments
The solution for applications with particularly harsh ambient conditions is AHS/AHM36 stainless steel Inox encoders. The housing, flange, shaft and stator coupling are made entirely of stainless steel (1.4305). Enclosure rating IP69K ensures additional impact protection which protects the shaft sealing ring installed in the encoder from the water jet of the shock blower.
AHS/AHM36 Inox devices offer high resistance to environmental influences. With the IP69K enclosure rating, the encoders are suitable for use in machines that are regularly cleaned with high-pressure cleaners.
Advantages with IO-Link
IO-Link is a point-to-point communication protocol for connecting intelligent sensors and actuators within an automation network. SOPAS ET – the configuration software from SICK – allows IO-Link devices such as the AHS/AHM36 IO-Link to be easily visualized and parameterized. AHS/AHM36 IO-Link can be connected to any IO-Link master. The IO-Link offers a lot of benefits, e.g. automated storage of device parameters, unique device identification and the use of cost-efficient unshielded standard cables. In the Advanced and Inox versions, the AHS/AHM36 encoders offer extensive IO-Link functions, such as providing and storing diagnostic data (temperature, operating time, etc.), a configurable input and output pin, and integrated Smart Tasks, e.g. for length measurement. Thanks to their remote intelligence, these encoders provide the prerequisites for successful integration in more extensive edge computing concepts used for applications in Industry 4.0 and Smart Factory implementation.
Special versions of the AHS/AHM36 IO-Link include so-called Smart Tasks which enables them to make decentralized decisions and also carry them out autonomously. They take care of functions at the superordinate automation level, thereby improving response times because they reduce the communication load over the Ethernet and fieldbus networks. A wide variety of applications in which length measurement plays an important role can be designed more efficiently using Smart Tasks:
“Length measurement and trigger” Smart Task
The IO-Link encoder measures and/or monitors the length of objects based on defined limit values, and outputs a signal when the length falls above or below these limits, for example in sorting processes in conveyor belt applications.
The IO-Link encoder outputs a trigger when a pre-defined length has been reached. This Smart Task is used, for example, for cutting processes in the packaging and timber processing industries.
The IO-Link interface enables cost-effective and easy integration of AHS/AHM36 devices into Ethernet and fieldbus networks. The provision and saving of diagnostic data, a configurable input and output pin and integrated Smart Tasks offer the user countless additional benefits.
Benefits of SSI and CANopen
The two established CANopen and SSI communication interfaces, with which the AHS/AHM36 encoders are available, also offer many advantages. Diagnostic data can be communicated as service data via the CANopen interface in addition to the process data position, speed and current temperature. For example, this includes the maximum speed, minimum and maximum temperature and the operating time. AHS/AHM36 CANopen can be configured either using the EDS file via the engineering tool of the respective control, or via the PGT-12-Pro hand-held programming tool from SICK. The programmable AHS/AHM36 SSI devices can be used both via the SICK SOPAS engineering tool or via the PGT-10-Pro hand-held programming tool. Various parameters such as the resolution, counting direction and code type can be customized according to the application. Even the structure of the SSI protocol to be output can be adapted so that the AHS/AHM36 encoders are compatible with virtually any SSI encoder.
The AHS/AHM36 CANopen and AHS/AHM36 SSI encoders can be configured individually, making it possible to adjust them flexibly to nearly any application. Thanks to the compact, hand-held programming tools, this is done independently and without the installation of hard- or software.