Contact
Feedback

Modules and gateways

A clever connection
Show all Hide all
Filter by:

75 results:

Result 1 - 24 out of 75

  • Accessory family: Fieldbus modules
  • Description: PROFINET IO-Link Master, IO-Link V1.1, Port Class A, power supply via 7/8'' cable 24 V / 8 A, fieldbus connection via M12 cable
Details
Compare now
Piece
  • Accessory family: Fieldbus modules
  • Description: EtherCAT IO-Link Master, IO-Link V1.1, Port Class A, power supply via 7/8'' cable 24 V / 8 A, fieldbus connection via M12 cable
Details
Compare now
Piece
  • Accessory family: Fieldbus modules
  • Description: EtherNet/IP IO-Link Master, IO-Link V1.1, Port Class A, power supply via 7/8'' cable 24 V / 8 A, fieldbus connection via M12-cable
Details
Compare now
Piece
  • Accessory family: Fieldbus modules
  • Description: EtherCAT coupler for WLL180T, KTL180 and AOD1. Features: EtherCAT, transmission rates of up to 100 Mbaud, M12 EtherCAT connection, M8 voltage supply connection, 4-pin, full read/write functionality for the process and service data of the connected sensors. See operating instructions for additional information and technical details
Details
Compare now
Piece
  • Accessory family: Fieldbus modules
  • Description: Features: Profibus DP-V1 slave, transmission rate of 9.6 kbit/s – 12 Mbit/s, D-Sub connection (RS485), 9-pin, Profibus, M8 connection, 4-pin, access to all parameters of the connected sensors possible. See operating instructions for additional information and technical details
Details
Compare now
Piece
  • Accessory family: Connection modules
  • Description: Compact connection module for wiring the voltage supply, I/Os, serial data interface and encoder. Intended for use with Bulkscan® LMS511. The mounting bracket with part no. 2059271 is required to connect the sensor.
Details
Compare now
Piece
  • Accessory family: Connection modules
  • Description: Ranger E/D connection terminal, screw connectors for fast I/O and encoder connection, DSUB for camera connection and plug for 24 V power supply
Details
Compare now
Piece
  • Accessory family: Connection modules
  • Description: Encoder splitter for connection of up to eight devices to one encoder
Details
Compare now
Piece
  • Accessory family: Interface modules
  • Description: Meeting Point Router MPR-4G with 2 x Ethernet interfaces, 4G mobile router with 2 x SMA antenna connection, outer wall or magnetic base antenna are not included with delivery, operation via LC display
Details
Compare now
Piece
  • Accessory family: Evaluation units
  • Description: OD Mini evaluation unit, OD5000 and OL1, slave, 3 x Q, 1 x analog, open end cable, 2 m
Details
Compare now
Piece
  • Accessory family: Evaluation units
  • Description: OD Mini evaluation unit, OD5000 and OL1, master, 3 x Q, 1 x analog, open end cable, 2 m
Details
Compare now
Piece
  • Accessory family: Fieldbus modules
  • Description: MLG-2 ProNet, fieldbus module: PROFINET
Details
Compare now
Piece
  • Accessory family: Interface modules
  • Description: Interface module for DME, DIN rail mount, DB9 female connector,wiring terminals
Details
Compare now
  • Accessory family: Connection modules
  • Description: Outdoor Ethernet-Switch, 8 ports, operating temperature range –40 °C ... +75 °C
Details
Compare now
Piece
  • Accessory family: Connection modules
  • Description: Indoor Ethernet-Switch, 8 ports, operating temperature range 0 °C ... +55 °C
Details
Compare now
Piece
  • Accessory family: Power supply modules
  • Description: NAMUR isolatig amplifier, Cable fault detection, Switching outputs: 2 NO relay (1 per channel), Supply voltage: 19,2 V ... 30 V, Voltage type: DC
Details
Compare now
Piece
  • Accessory family: Evaluation units
  • Description: OD Max evaluation unit, 5x NPN, required for OD350-x, OD85-x and OD30-x
Details
Compare now
Piece
  • Accessory family: Evaluation units
  • Description: OD Max evaluation unit, 5x NPN, required for OD25-01T1
Details
Compare now
Piece
  • Accessory family: Evaluation units
  • Description: OD Max evaluation unit, 5x PNP, required for OD25-01T1
Details
Compare now
Piece
  • Accessory family: Evaluation units
  • Description: OD Max evaluation unit, 5x PNP, required for OD350-x, OD85-x and OD30-x
Details
Compare now
Piece
  • Accessory family: Evaluation units
  • Description: Evaluation unit: OD Precision, 5 x NPN
Details
Compare now
Piece
  • Accessory family: Connection modules
  • Description: IO-Link V1.1 Class A port, USB2.0 port, optional external power supply 24V / 1A
Details
Compare now
Piece
  • Accessory family: Connection modules
  • Description: BAM100 analog module for Bulkscan, by Beckhoff, 24 V DC supply voltage (-15% / + 20%), rail mounting on 35 mm C rail, according to EN 50022 with interlocking, Ethernet TCP/IP interface (RJ45), CoLa communication, 3 x IN: 4 mA ... 20 mA, 4 x OUT: 4 mA ... 20 mA
Details
Compare now
Piece
  • Accessory family: Fieldbus modules
  • Description: External CAN expansion module for up to 8 additional digital outputs, IP 20
Details
Compare now
Piece

Result 1 - 24 out of 75

TOP