Adaptor
The right connection
112 results:
- Connection type head A: 3-pin
- Number of slots: 10
- Slot connection type: M8 3-pin A-coded female connector
- Cable: 5 m, 12-wire, PUR, halogen-free
- Description: Unshielded
- Application: Drag chain operation
- Connection type head A: 3-pin
- Number of slots: 6
- Slot connection type: M8 3-pin A-coded female connector
- Description: Unshielded
- Connection type head A: 4-pin
- Number of slots: 10
- Slot connection type: M8 4-pin A-coded female connector
- Cable: 5 m, 22-wire, PUR, halogen-free
- Description: Unshielded
- Application: Drag chain operation
- Connection type head A: 3-pin
- Number of slots: 8
- Slot connection type: M8 3-pin A-coded female connector
- Cable: 5 m, 10-wire, PUR, halogen-free
- Description: Unshielded
- Application: Drag chain operation
- Connection type head A: 3-pin
- Number of slots: 10
- Slot connection type: M8 3-pin A-coded female connector
- Description: Unshielded
- Connection type head A: 3-pin
- Number of slots: 8
- Slot connection type: M8 3-pin A-coded female connector
- Description: Unshielded
- Connection type head A: 3-pin
- Number of slots: 6
- Slot connection type: M8 3-pin A-coded female connector
- Cable: 5 m, 8-wire, PUR, halogen-free
- Description: Unshielded
- Application: Drag chain operation
- Connection type head A: 3-pin
- Number of slots: 4
- Slot connection type: M8 3-pin A-coded female connector
- Description: Unshielded
- Connection type head A: 3-pin
- Number of slots: 4
- Slot connection type: M8 3-pin A-coded female connector
- Cable: 5 m, 6-wire, PUR, halogen-free
- Description: Unshielded
- Application: Drag chain operation
- Connection type head A: 4-pin
- Number of slots: 8
- Slot connection type: M8 4-pin A-coded female connector
- Cable: 5 m, 18-wire, PUR, halogen-free
- Description: Unshielded
- Application: Drag chain operation
- Accessory family: Other adapters
- Description: Connector for cascading safe multibeam scanners Connection option for 2 scanGrid2 units or connection option for 1 scanGrid2 unit and 1 additional Multi Sensor Connector.
- Accessory family: Other adapters
- Cable material: PVC
- Connecting cable: 1.7 m, for details see dimensional drawings, PVC
- Connection type head A: Male connector, Micro D-Sub, 15-pin, angled
- Connection type head B: 2x cables, 8-wire
- Description: For connecting the Motion Control Module FX3-MOC with two HTL, TTL, or sin/cos encoders
- Accessory family: Other adapters
- Cable material: PVC
- Connecting cable: 1 m, for details see dimensional drawings, PVC
- Connection type head A: Male connector, Micro D-Sub, 15-pin, angled
- Connection type head B: 2 x female connector, M12, 8-pin, straight
- Description: For connecting the Motion Control Module FX3-MOC with two HTL, TTL, or sin/cos encoders
- Connection type head A: Female connector, M12, 8-pin, A-coded
- Connection type head B: Female connector, M12, 8-pin, A-coded
- Connection type head C: Male connector M12 8-pin A-coded
- Description: T-distributor for simultaneous connection to sender and receiver, splits the cable from the control cabinet between the sender and receiver
- Note: 8-pin
- Accessory family: Other adapters
- Description: For connecting the microScan3 - PROFINET M12 variants on push-pull
- Connection type head A: Male connector, M12, 5-pin, A-coded
- Connection type head B: Female connector, M12, 5-pin, A-coded
- Connection type head C: Female connector M12 5-pin A-coded
- Accessory family: Other adapters
- Description: The M12 8-pin pushbutton makes it possible to switch the laser alignment aid integrated in the deTec4 sender on and off.
- Accessory family: Other adapters
- Description: The M12 5-pin pushbutton makes it possible to switch the laser alignment aid integrated in the deTec4 sender on and off.
- Description: X-junction for safe linear positioning Pre-assembled cable with SSI signal splitter
- Connection type head A: Female connector, M12, 5-pin, A-coded
- Connection type head B: Female connector, M12, 8-pin, A-coded
- Connection type head C: Male connector M12 8-pin A-coded
- Note: Male connector M12, 8-pin, to 1 x female connector M12, 8-pin, to 1 x female connector M12, 5-pin, for connecting of a PLC
- Connection type head A: Male connector, M12, 5-pin, A-coded
- Connection type head B: Female connector, M12, 5-pin, A-coded
- Connection type head C: Female connector M12 5-pin A-coded
- Description: Male insert rotated by 90°
- Connection type head A: Female connector, M12, 5-pin
- Connection type head B: Female connector, M23, 19-pin
- Number of slots: 8
- Slot connection type: M12
- Description: Connector M23
- Note: Consolidation of sensor and actuator signals
- Accessory family: Other adapters
- Description: Connection mask for looping in a hand-held scanner or ICR80x via the CDM420 AUX interface